How To Replace Bike Chain?

Unless you happen to be someone who has worked as an auto mechanic, not many people are aware that bike chains are consumable parts. No matter how effectively you try and take care of it, a day will come where it will be all rusted and you will have to replace it.

Even though it is made out of hard steel, it is still quite prone to corrosion and rust. Unfortunately, there is not much you can do about it except to have it replaced whenever it’s said and done for.

If you’re confused as to how will you figure out when the bike chain needs replacement, you can always invest in a chain checker. It is a great tool that will keep a damaged chain from affecting all other components of your bike.

Since worn out chains can be a frequent problem for someone who bikes regularly. It can prove to be a hassle to go to the mechanic’s shop and have your chain replaced. So, in this article, we are going to talk about how easily you can replace a bike chain within 15 minutes.

All you need is a new chain and a chain tool to get things started:

  • Remove the worn out chain

First things first, remove the old chain. If it features a two-piece link, you can conveniently squeeze it together and break it apart. If you’re using a Shimano chain, then you will require a chain tool to split apart both sides.

  • Cassette cleaning

Since you have already opened up the chain rings and the cassette, now would be a good time to clean it all. There is usually a lot of dirt stuck in the cassette and chain rings that one cannot clean if the chain hasn’t been split apart. Clean it up before you install the new chain.

  • Thread the chain

Once the cassette has been cleaned up, all you have to do is thread the chain nicely and carefully. Thread it through the cage by making sure it stays around the lower wheel.

  • Cut the size

You will have to cut the size of this chain according to tension you prefer. You can cut the size you need and then make sure the open end remains in front. Once that’s done, grab the chain tool again and squeeze both ends together.

  • Push the pin

To lock the chain in its place, every chain package includes a pin that you will have to insert between the chain rings. Once you have cut the chain and it’s been adjusted over the bike, insert the pin and you’re good to go.


As you can see, replacing the bike chain isn’t as hard as some people may think. It doesn’t take any time at all. You just need to know the technique of you can do it and it is done. We hope this article has been helpful to you. if you have any queries in this regard, do let us know through your feedback below.

Leave a Comment